What Home Energy Audits Involve
Some heating and cooling companies only try to sell you on home energy audits, also known as an energy assessment, in order to push new large appliances on you when the survey is finished. However, Bryant authorized technicians go through a rigorous set of steps during a home energy audit, and will only recommend certain energy saving products if it’s clear they would bring great benefits to your home. A thorough home energy audit performed by a local Bryant contractor involves the following measures:
Identifying Hot and Cold Spots in the Home
Your home energy auditor will test and see if certain areas (such as a corner of a room or a hallway) are disproportionately hotter or colder than the rest of the house. If these spots are present, that probably means your heating and cooling equipment is working harder than it needs to bring those areas up to par. If so, you may need a stronger heater or air conditioner, but your Bryant authorized auditor will be able to identify smaller and more affordable appliances that will help the situation.
Checking for Sufficient Insulation
The Bryant approved energy auditor will also check your home’s walls and attic to make sure the insulation is up to par. Especially if you have an older house, your home’s insulation may be below current recommended levels. If your house is lacking in insulation, that may be why it can’t cool down efficiently during summer and warm up to the desired level during winter.
Seeking out Air Leaks in the Attic, Walls and Ductwork
The energy conservation expert will then locate any problematic air leaks, whether in the attic, baseboards, walls and/or in the ductwork of your central air system. Sealing or reducing the amount of air leakage in a home generally elicits an energy savings of 5 to 30 percent annually. Some of these leaks you may be able to seal yourself, but your local Bryant contractor has the resources to improve the situation, as well.
Inspecting Heating and Cooling Equipment
Some of the biggest issues involving energy waste come from the heating and cooling units themselves. This is why Bryant approved energy auditors make it a point to thoroughly inspect all heating and cooling equipment during an energy assessment. For example, the equipment may need to be cleaned, and filters might have to be changed. If a unit is more than 15 years old, it’s likely dragging down the energy efficiency of your residence.
The Next Step: Recommendations for Energy Efficiency
After the comprehensive home energy audit is complete, your helpful, Bryant authorized technician will recommend ways you can save energy. In some cases, the technician may simply offer easy energy saving tips that apply to your situation, which you can implement on your own. Or, perhaps just a Bryant smart thermostat is needed to give you better control of when your heating and cooling system is running, including when you’re away from home.
In other instances, the energy conservation expert may determine new equipment would drastically improve your situation, whether it be a heating or cooling unit or an indoor air quality product. If you’re comfortable with moving forward, the technician will be able to walk you through the full range of Bryant energy saving products that are capable of specifically addressing your home’s energy deficiencies. Local Bryant heating and cooling companies are committed to doing whatever it takes to make sure customers are living in a comfortable, energy efficient environment.